| No | Draft Myanmar Standards | Abstract/Scope | Committee | Open Date | Close Date |
|---|---|---|---|---|---|
| 151 | DMMS ISO 6803:2017 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |  |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 152 | DMMS ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 153 | DMMS ISO 48-2:2018 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 154 | DMMS ISO 2930:2017 Rubber, raw natural — Determination of plasticity retention index (PRI) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 155 | DMMS ISO 11852:2017 Rubber — Determination of magnesium content of field natural rubber latex by titration | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 156 | DMMS ISO 249:2016 Rubber, raw natural — Determination of dirt content | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 157 | DMMS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 158 | DMMS ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 159 | DMMS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 160 | DMMS ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 161 | DMMS ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 162 | DMMS ISO 4079:2017 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 163 | DMMS ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 164 | DMMS ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 165 | DMMS ISO 8789:2018 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 166 | DMMS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 167 | DMMS ISO 11425:2018 Rubber hoses and hose assemblies for automobile power-steering systems — Specification | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 168 | DMMS ISO 4927:2005 Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 169 | DMMS ISO 3996:1995 Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 170 | DMMS ISO 4928:2006 Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 171 | DMMS ISO 4930:2006 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 172 | DMMS ISO 6117:2005 Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 173 | DMMS ISO 6118:2006 Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 174 | DMMS ISO 6119:2006 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
| 175 | DMMS ISO 7632:1985 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) | |
TC11-Technical Committee for Rubber-based product | 21.1.2020 | 21.3.2020 |
ဖော်ပြပါ မြန်မာစံချိန်စံညွှန်း(မူကြမ်း) များ နှင့်ပတ်သက်၍ သဘောထား မှတ်ချက်များ ပေးပို့လိုပါက standards.mstrd@ gmail.com နှင့် [email protected] သို့ ပေးပို့နိုင်ပါသည်။